Implant-Specific Instruments

Total: (139)

Screw Targeting Jig for Supracondylar Nail

Screw Targeting Jig for Supracondylar Nail

Model No: IML1297

Description: Screw Targeting Jig for Supracondylar Nail...

Counter sink

Counter sink

Model No: IBS700

Description: The GPC countersink is used for making the countersink for the inter fragmentary screws used in Eg: spiral fractures of the tibia. It is available in sizes of 2.0mm, 3.5mm,...

Depth Gauge (A.O. Type)

Depth Gauge (A.O. Type)

Model No: IBS708

Description: The GPC depth guage (*AO type) is used for measuring the size of the screw. It is available in three sizes: mini(for screws of  mini fragment plates), small(for screws of...

Drill Sleeve/ Stop

Drill Sleeve/ Stop

Model No: IBS715

Description: The drill sleeve is used for protection of the soft tissues when the drill is being used. It is being used for 2.0mm, 2.7mm and 3.2mm drill bits....

Drill Sleeve Insert

Drill Sleeve Insert

Model No: IBS720

Description: The GPC drill sleeve insert is used for as a protection sleeve for soft tissues while drilling. It is available in diameter of 2.5mm and 3.2mm....

Gauge for Screw S.S.

Gauge for Screw S.S.

Model No: IBS722

Description: The GPC gauge for screw is used for measuring the length of the screws....

Combined Drill & Tap Sleeve

Combined Drill & Tap Sleeve

Model No: IBS735

Description: The GPC Combined drill and tap is used with one end as the drill sleeve and the other end as the tap sleeve to protect the soft tissues. It is...

Screw Driver, Lane's Type

Screw Driver, Lane's Type

Model No: IBS745

Description: The GPC Screw driver (Lanes type) is used for cortical screw slotted head insertion....

William Screw Driver

William Screw Driver

Model No: IBS748

Description: William Screw Driver...

Hexagonal Screw Driver 1.5mm

Hexagonal Screw Driver 1.5mm

Model No: IBS749

Description: The GPC Hexagonal Screw Driver is used for 1.5mm screw insertion....

Reverse Measuring Device

Reverse Measuring Device

Model No: IBS750

Description: The GPC Reverse measuring device is used for measuring the length of the guide wire inserted into the neck of femur or distal femur. This is used during DHS/DCS insertion...

Screw Holding Forceps

Screw Holding Forceps

Model No: IBS753

Description: The GPC Screw holding forceps is used to take out the selected length of the screw from the screw box during surgery. It makes the removal of the screw from...

Pointed Drill Guide

Pointed Drill Guide

Model No: IBS755

Description: The Gpc Pointed Drill Guide is used for inserting the wire in to scaphoid for insertion of the Herbert screw....

Washer Hanger

Washer Hanger

Model No: IBS758

Description: The GPC washer hanger is used for keeping the washers on the instrument set together....

Bone Taps

Bone Taps

Model No: IBS760

Description: The GPC bone taps are used for tapping the bone after drilling the bone .they are available in various diameter according to the diameter of the screw to be inserted....

Bone Tap Quick Coupling

Bone Tap Quick Coupling

Model No: IBS762

Description: The GPC bone taps quick coupling is used with quick coupling handle to tap the bone. It is available in various diameter according to the diameter of the screw to...

Quick Coupling Handle for Taps

Quick Coupling Handle for Taps

Model No: IBS765

Description: The GPC Quick coupling handle with taps is used with the bone taps quick coupling for tapping the bone once the pilot hole has been drilled....

Quick Coupling attachment with fibre Handle

Quick Coupling attachment with fibre Handle

Model No: IBS766

Description: Quick Coupling attachment with fibre Handle...

Neutral and Eccentric Drill Guide for 2.0mm

Neutral and Eccentric Drill Guide for 2.0mm

Model No: IBS770

Description: The GPC neutral and eccentric drill guide is used for making a central or eccentric hole through the compression plate....

Neutral and Loaded Drill Guide for 2.5mm

Neutral and Loaded Drill Guide for 2.5mm

Model No: IBS775

Description: Neutral and Loaded Drill Guide for 2.5mm...

Neutral and Loaded Guide, Large for 3.2mm Drill

Neutral and Loaded Guide, Large for 3.2mm Drill

Model No: IBS777

Description: The GPC Neutral and loaded guide large for 3.2mm drill is used for making neutral and eccentric drill holes for the 4.5mm cortical screws used in the 4.5mm plates....

Quick Coupling Adaptor with Jacob End

Quick Coupling Adaptor with Jacob End

Model No: IBS778

Description: The GPC quick coupling adaptor with Jacob end is used for attaching the drill bit....

Hollow Mill for Removal of Screw

Hollow Mill for Removal of Screw

Model No: IBS779

Description: The GPC hollow mill for removal of screw is used for drilling on top of the broken screw for removal of the screw....

Cannulated Tap 7.0mm

Cannulated Tap 7.0mm

Model No: IBS780

Description: The GPC cannulated tap 7.0mm is used for making threads for 7.0mm cannulated cancellous screws....

Guide Wire 1.8mm

Guide Wire 1.8mm

Model No: IBS782

Description: The GPC guide wire 1.8mm is used for DHS guide wire and cannulated cancellous screw guide wire....

Cannulated Drill Bit 4.5mm

Cannulated Drill Bit 4.5mm

Model No: IBS784

Description: The GPC cannulated drill bit 4.5mm is used for drilling on top of the guide wire for 7.0mm cannulated cancellous screws....

Triple Trocar

Triple Trocar

Model No: IBS785

Description: The GPC triple trocar is used as a trocar and also a protection sleeve while drilling....

Screw Driver with Holding Sleeve 1.5mm

Screw Driver with Holding Sleeve 1.5mm

Model No: IBS786

Description: The GPC screw driver with holding sleeve is used for holding the different screws. It has a holding sleeve which prevents the screw from falling while inserting the screw. It...

Parallel Wire Guide

Parallel Wire Guide

Model No: IBS788

Description: The GPC parallel guide wire is a jig which is used for insertion of parallel guide wires in fracture neck of femur when cannlated cancellous screws are used....

Bone Plate Bender Large

Bone Plate Bender Large

Model No: IBP630

Description: The GPC bone plate bender large is used for bending the large fragment plates....

Bone Plate Bender Small

Bone Plate Bender Small

Model No: IBP630.1

Description: The GPC Bone plate bender small is used for bending or contouring the small fragment plates....

Bone Plate Bender Mini

Bone Plate Bender Mini

Model No: IBP630.2

Description: The GPC Bone plate bender Mini is used for bending or contouring the mini fragment plates....

Bone & Bone Plate Holding Forceps with foot for D.C.P. (thread lock)

Bone & Bone Plate Holding Forceps with foot for D.C.P. (thread lock)

Model No: IBP637

Description: The GPC Bone & bone plate holding forceps with foot for DCP is used for holding the DCP plate on the bone while plating....

Drill Sleeve for Locking Screw 3.5mm

Drill Sleeve for Locking Screw 3.5mm

Model No: ILBS716.03

Description: The GPC Drill sleeve for locking screw 3.5mm is a sleeve with threads. It is used on the small fragment plates for locking it onto the plate. The drill bit...

Driver sleeve for locking screw

Driver sleeve for locking screw

Model No: ILBS716.04

Description: Driver sleeve for locking screw...

Drill Sleeve For Locking Screw 5.0mm

Drill Sleeve For Locking Screw 5.0mm

Model No: ILBS716.05

Description: The GPC Drill sleeve for locking screw 5.0mm is a sleeve with threads. It is used on the large fragment plates for locking it onto the plate. The drill bit...

Drill Sleeve for Locking Cancellous Screw 6.5mm

Drill Sleeve for Locking Cancellous Screw 6.5mm

Model No: ILBS717

Description: The GPC Drill sleeve for locking cancellous screw 6.5mm is a sleeve with threads. It is used on the large fragment plates for locking it onto the plate. The drill...

Drill Bit for Locking Screw

Drill Bit for Locking Screw

Model No: ILBS736.28

Description: The GPC Drill bit for locking screw 2.8mm, 2.0mm is a drill bit for 2.8mm and 2.0mm locking screws used in mini fragment plates....

Drill Bit for Locking Screw Size:-4.3mm

Drill Bit for Locking Screw Size:-4.3mm

Model No: ILBS736.43

Description: The GPC Drill bit for locking screw 4.3mm is a drill bit for 5.0mm locking screws used in large fragment plates....

Screw Driver, for Hexagonal Type

Screw Driver, for Hexagonal Type

Model No: ILBS747

Description: The GPC Screw driver, Hexagonal type is available in three different socket diameters of 1.5mm, 2.5mm, 3.5mm. The 1.5mm is used for 2.4 & 2.8mm screws. The 2.5mm diameter is...

Torque Screw Driver

Torque Screw Driver

Model No: ILBS786

Description: The GPC torque Screw driver is available in three different socket diameters of 1.5mm, 2.5mm, 3.5mm. The 1.5mm is used for 2.4 & 2.8mm locking screws. The 2.5mm diameter is...

Torque Screw Driver with holding sleeve

Torque Screw Driver with holding sleeve

Model No: ILBS786.15

Description: The GPC torque Screw driver with holding sleeve is available in three different socket diameters of 1.5mm, 2.5mm, 3.5mm. The 1.5mm is used for 2.4 & 2.8mm locking screws. The...

Reconstruction Plate Bender

Reconstruction Plate Bender

Model No: IBP639

Description: Reconstruction Plate Bender...

Muller compression Clamp

Muller compression Clamp

Model No: IBP643

Description: Muller compression Clamp...

Plate Bending Press

Plate Bending Press

Model No: IBP640

Description: Plate Bending Press...

Plate Bending Pliers (Roller Type)

Plate Bending Pliers (Roller Type)

Model No: IBP642

Description: Plate Bending Pliers (Roller Type)...

Plate Holding Forceps

Plate Holding Forceps

Model No: BHA258

Description: The GPC Plate holding forceps is used for holding the plates....

Driver Handle for Jewett Nail Plate

Driver Handle for Jewett Nail Plate

Model No: HNI12

Description: The GPC Driver handle for Jewitt Nail Plate is used for inserting the jewitt nail plate....

Starter for Jewett Nail Plate

Starter for Jewett Nail Plate

Model No: HNI30

Description: The GPC Starter for Jewitt Nail Plate is used for making the entry for the jewitt nail plate....

Impactor for Jewett Nail Plate

Impactor for Jewett Nail Plate

Model No: HNI31

Description: The GPC Impactor for Jewitt Nail Plate is used for impacting the jewitt nail....

Square Nail Reamer

Square Nail Reamer

Model No: KSN49

Description: The GPC Square Nail Reamer is used for reaming the medullary canal before inserting the nail....

Square Nail Extractor Hook

Square Nail Extractor Hook

Model No: KSN50

Description: The GPC Square Nail extractor hook is used for removal of the GPC square nail....

Elastic Nail Punch

Elastic Nail Punch

Model No: KSN53

Description: The GPC Elastic Nail punch is used for impacting the nail into the medullary canal of the bone....

Elastic Nail Introducing Rod

Elastic Nail Introducing Rod

Model No: KSN57

Description: The GPC Elastic Nail introducing rod is used for introducing the square nail....

Elastic Nail Introducer with S.S. Chuck & Key

Elastic Nail Introducer with S.S. Chuck & Key

Model No: KSN58

Description: The GPC Elastic Nail Introducer with S.S. chuck& key is used for inserting the Tens nail and square nail....

Slotted Hammer for Introducing Rod for Elastic Nail

Slotted Hammer for Introducing Rod for Elastic Nail

Model No: KSN59

Description: The GPC Slotted hammer for introducing rod for elastic nail is used for hammering the nail on the introducing rod....

Bender for Ender’s Nail

Bender for Ender’s Nail

Model No: KSN55

Description: The GPC Bender for Ender's Nail is used for bending the ender's nail....

Bending Fixator for Ender’s Nail

Bending Fixator for Ender’s Nail

Model No: KSN56

Description: The GPC Bending fixator for ender's nail is used for bending the ender's nail....

Slotted Hammer for Ender’s Nail

Slotted Hammer for Ender’s Nail

Model No: KSN51

Description: The GPC Slotted hammer for ender's nail is used for hammering the ender's nail on the introducer....

Bone Awl (Small)

Bone Awl (Small)

Model No: KSN52

Description: The GPC Bone AWL(small) is used for making the entry into the bone for inserting the ender's nail or the TENS nail....

Ender’s Nail Introducer

Ender’s Nail Introducer

Model No: KSN54

Description: The GPC Ender's Nail introducer is used for inserting the ender's nail in to the medullary cavity....

Ender’s Nail Extractor

Ender’s Nail Extractor

Model No: KEN53

Description: The GPC Ender's Nails extractor is used for extracting the ender's nail....

Awl. Diamond pointed for Kuntscher Nails - Straight

Awl. Diamond pointed for Kuntscher Nails - Straight

Model No: KNI60

Description: The GPC Awl diamond pointed for Kunchers Nails-Straight is used for making the entry point for the kuntchers nail....

Awl. Diamond pointed for Kuntscher Nails – Curved

Awl. Diamond pointed for Kuntscher Nails – Curved

Model No: KNI62

Description: The GPC Awl diamond pointed for Kunchers Nails-Curved is used for making the entry point for the kuntchers nail....

Gauge for Kuntscher Nails

Gauge for Kuntscher Nails

Model No: KNI66

Description: The GPC Gauge for Kuntchers Nails is used for measuring the diameter of the kuntchers nail....

Kuntscher Nail set

Kuntscher Nail set

Model No: KNI71

Description: Kuntscher Nail set...

Medullary Canal Reamer

Medullary Canal Reamer

Model No: KNI73

Description: The GPC Medullary Canal Reamer is available in various  diameters from 6mm to 13mm(1mm increments) is used for reaming the medullary canal....

K. Nail Driver

K. Nail Driver

Model No: KNI74

Description: The GPC K nail driver is used for pushing the k nail into the medullary canal....

K-Nail Extractor with 2 hooks

K-Nail Extractor with 2 hooks

Model No: KNI76

Description: The GPC K nail extractor with two hooks is used for exaction of the K nail....

Spare Hook for K-Nail Extractor

Spare Hook for K-Nail Extractor

Model No: KNI78

Description: Spare Hook for K-Nail Extractor...

Cannulated Hand Reamer 6mm to 14mm

Cannulated Hand Reamer 6mm to 14mm

Model No: KNI79

Description: Cannulated Hand Reamer 6mm to 14mm...

Bone Awl with eye - Aluminum Handle

Bone Awl with eye - Aluminum Handle

Model No: IPW920

Description: The GPC Bone Awl with eye - Aluminum handle is available in four diameters of 1.5mm, 2.0mm, 2.5mm, 3.0mm. The Bone awl is used for passing the suture through the...

Steinmann pin introducer S.S. with S.S. Chuck & Key

Steinmann pin introducer S.S. with S.S. Chuck & Key

Model No: IPW927

Description: The GPC Steinmann pin introducer S.S. with chuck & key is used for introducing the Steinmann pin. The key is used for tightening the Steinmann pin before introducing the pin. It is...

Bone Awl with eye - Fibre Handle

Bone Awl with eye - Fibre Handle

Model No: IPW922

Description: The GPC Bone Awl with eye - Fibre handle is available in four diameters of 1.5mm, 2.0mm, 2.5mm, 3.0mm.The Bone awl is used for passing the suture through the bone....

Wire Twister S.S. (Conventional Model)

Wire Twister S.S. (Conventional Model)

Model No: IPW940

Description: The GPC Wire twister S.S. (conventional model) is a sturdy wire twister used for twisting the stainless steel wire during various surgeries....

Wire Twister S.S. with 2 Pegs

Wire Twister S.S. with 2 Pegs

Model No: IPW942

Description: The GPC Wire twister S.S with two pegs is a sturdy wire twister used for twisting the stainless steel wire during various surgeries....

Wire Passer

Wire Passer

Model No: IPW945

Description: The GPC Wire Passer is used for passing the stainless steel wire around the bone without causing injury to the neuro vascular structures and getting entangled in the muscle while...

Wire Tightening Forceps (A.O. Type)

Wire Tightening Forceps (A.O. Type)

Model No: IPW949

Description: The GPC wire tightening forceps (A.O. type) is used for tightening the stainless steel wire eg: In tension band wiring or encirclage....

Wire Bender

Wire Bender

Model No: IPW950

Description: The GPC Wire Bender is used for holding the stainless steel wire and bending the wire....

Plier Cum Wire Bender Cum Wire Cutter

Plier Cum Wire Bender Cum Wire Cutter

Model No: IPW952

Description: Plier Cum Wire Bender Cum Wire Cutter...

Wire Tightner Cum Twister Cum Cutter

Wire Tightner Cum Twister Cum Cutter

Model No: IPW953

Description: The GPC Wire tightner cum twister cum cutter is a single instrument used for tightening, twisting and cutting....

K. Wire Bender

K. Wire Bender

Model No: IPW946

Description: The GPC K wire bender is used for bending the K wire after insertion and before cutting....

Cerclage Wire Holding Forceps

Cerclage Wire Holding Forceps

Model No: IPW960

Description: The GPC Cerclage wire holding forceps is used for holding the stainless steel wire and tightening the wire....

Wire Cutter, S.S.

Wire Cutter, S.S.

Model No: IPW956

Description: The GPC Wire cutter SS is used for cutting the stainless steel wire and for cutting the K wires....

Jumbo Cutter

Jumbo Cutter

Model No: IPW958

Description: The GPC Jumbo cutter is used for cutting the large diameter rods like the pedicle screw rods etc. It is a heavy duty wire cutter....

Vice Grip

Vice Grip

Model No: IPW959

Description: The GPC Vice Grip is used for holding the wires etc....

Staple Introducer

Staple Introducer

Model No: SSI1113

Description: The GPC Staple introducer is used for holding and inserting the Coventry staples or thorny staples....

Starter for Staples in 2 sizes 5/8”, 7/8”

Starter for Staples in 2 sizes 5/8”, 7/8”

Model No: SSI1115

Description: The GPC Starter for staples is available in 5/8", 7/8" is used for making the slot before inserting the staple....

Staple Extractor

Staple Extractor

Model No: SSI1116

Description: The GPC Staple extractor is used for extracting the staple....

Coventry Staple Inserter

Coventry Staple Inserter

Model No: SSI1118

Description: The GPC Coventry staples inserter is used for inserting the coventry staples....

Bone Skid Murphy Lane

Bone Skid Murphy Lane

Model No: FHI42

Description: The GPC Bone Skid Murphy Lane is used for extracting the femoral head during hemi arthroplasty or total hip replacement or for inserting the head....

Hooks for Head Extractor

Hooks for Head Extractor

Model No: FHI44

Description: The GPC hook is used for retracting the greater trochanter while doing hemi arthroplasty. ...

Gauge for Prosthesis, set of nine

Gauge for Prosthesis, set of nine

Model No: FHI46

Description: The GPC Gauge for prosthesis, set of nine is used for measuring the removed femoral head to determine the size of the implant to be put during hemi arthroplasty. ...

Hollow Chisel, Austin Moore type

Hollow Chisel, Austin Moore type

Model No: FHI47

Description: The GPC Hollow chisel, Austin Moore type is used to make the entry point of the femoral implant during hemi arthroplasty....

Impactor for Femoral Head Tufnol faced Aluminum

Impactor for Femoral Head Tufnol faced Aluminum

Model No: FHI51

Description: The GPC Impactor for femoral head, aluminium is used to reduce the femoral hemiarthroplasty implant into the acetabulum....

Judet Auger Extractor S.S.

Judet Auger Extractor S.S.

Model No: FHI53

Description: The GPC Judet Auger Extractor S.S is used to extract the femoral head during hemi arthroplasty. It has a cork screw which can be screwed into the femoral head during...

Rasp. Moore Type Tommy Bar

Rasp. Moore Type Tommy Bar

Model No: FHI54

Description: The GPC Rasp Moore type with tommy bar is used for rasping the femoral canal for Austin moore prosthesis....

Rasp. Thompson Type with Tommy Bar

Rasp. Thompson Type with Tommy Bar

Model No: FHI55

Description: The GPC Rasp Thompson type with tommy bar is used for rasping the femoral canal for thompsons prosthesis....

Rasp Moore type-Extra long

Rasp Moore type-Extra long

Model No: FHI56

Description: The GPC Rasp Moore type extra long is used for rasping of the femoral canal when long stem Austin moore is used....

Bi-Polar Rasp

Bi-Polar Rasp

Model No: FHI57

Description: The GPC Bipolar rasp is used for rasping of the femoral canal when bipolar prosthesis is used....

Extractor Set for Austin Moore Prosthesis with 2 Hooks

Extractor Set for Austin Moore Prosthesis with 2 Hooks

Model No: FHI58

Description: The GPC Extractor set for austin moore prosthesis is used for extracting the implanted Austin moore prosthesis....

Judet Retractor

Judet Retractor

Model No: FHI59

Description: The GPC Judet retractor is used for retraction of the soft tissues during hemi arthroplasty....

Putty Rasp

Putty Rasp

Model No: FHI60

Description: The GPC putty rasp is used for making the entry into the femoal canal after the hollow chisel has been used.The putty rasp can also be used for making sure...

Austin Moore Impactor

Austin Moore Impactor

Model No: FHI62

Description: The GPC Austin moore impactor is used for impacting the austin moore implant into the femoral canal. ...

Bone File, Fibre Handle

Bone File, Fibre Handle

Model No: FHI64

Description: The GPC Bone file, fibre handle is used for smoothing any rough edges of the femoral neck before insertion of the implant. It can also be used for smoothing any...

Compressor

Compressor

Model No: MAS31

Description: The GPC compressor is used for compression during the pedicle screw insertion. It has a rachet lock that prevents it from slipping....

Polyaxial Screw Driver

Polyaxial Screw Driver

Model No: MAS32

Description: The GPC polyaxial screw driver is used for inserting the GPC polyaxial screw into the pedicle....

Pedical Elevator

Pedical Elevator

Model No: MAS33

Description: The GPC pedicle elevator is used for elevating the soft tissue before inserting the awl during pedicle screw fixation in the spine....

Spinal Rod Bander

Spinal Rod Bander

Model No: MAS34

Description: The GPC spinal rod bender is used for bending the connecting rods to the appropriate countour with is decided according to the template....

Monoaxial Screw Driver Shaft Sleeve

Monoaxial Screw Driver Shaft Sleeve

Model No: MAS35

Description: The GPC monoaxial screw driver is used for inserting the GPC mono axial screw into the pedicle....

Rod Clam, Long

Rod Clam, Long

Model No: MAS37

Description: Rod Clam, Long...

Rod Holder

Rod Holder

Model No: MAS38

Description: The GPC rod holder is used for holding the connecting rod into the slot to prevent it from coming out before tightening the screw....

Straight Awl

Straight Awl

Model No: MAS39

Description: The GPC straight awl is used for making the entry point in the pedicle during the pedicle screw insertion....

Spreader

Spreader

Model No: MAS40

Description: The GPC spreader is used for spreading the construct of the pedicle screw....

Inner Screw Inserter with Outer Nut Inserter

Inner Screw Inserter with Outer Nut Inserter

Model No: MAS41

Description: Inner Screw Inserter with Outer Nut Inserter...

Steffee Awl

Steffee Awl

Model No: SW27

Description: Steffee Awl...

Steffee Screw introducer

Steffee Screw introducer

Model No: SW28

Description: Steffee Screw introducer...

Steffee Screw Tap 4.5mm

Steffee Screw Tap 4.5mm

Model No: SW29

Description: Steffee Screw Tap 4.5mm...

Steffee Screw Tap 5.5mm

Steffee Screw Tap 5.5mm

Model No: SW30

Description: Steffee Screw Tap 5.5mm...

Steffee Wrench 8mm

Steffee Wrench 8mm

Model No: SW31

Description: Steffee Wrench 8mm...

Steffee Wrench 11mm

Steffee Wrench 11mm

Model No: SW32

Description: Steffee Wrench 11mm...

Cage Pusher big for 12 & 14mm cage

Cage Pusher big for 12 & 14mm cage

Model No: SEC61

Description: Cage Pusher big for 12 & 14mm cage...

Cage Pusher big for 16 & 18mm cage

Cage Pusher big for 16 & 18mm cage

Model No: SEC62

Description: Cage Pusher big for 16 & 18mm cage...

Cage Pusher Small

Cage Pusher Small

Model No: SEC63

Description: Cage Pusher Small...

Tommy Bar for Cage Expansion Straight

Tommy Bar for Cage Expansion Straight

Model No: SEC64

Description: Tommy Bar for Cage Expansion Straight...

Tommy Bar for cage Expansion curved

Tommy Bar for cage Expansion curved

Model No: SEC65

Description: Tommy Bar for cage Expansion curved...

Drumond Wire

Drumond Wire

Model No: PS925

Description: Drumond Wire...

Hartshill Frame 4.0mm, 4.5mm

Hartshill Frame 4.0mm, 4.5mm

Model No: PS925H

Description: Hartshill Frame 4.0mm, 4.5mm...

Crutch-Field Tong with two Burrs Large, Medium, Small (Deluxe Model)

Crutch-Field Tong with two Burrs Large, Medium, Small (Deluxe Model)

Model No: IKS1072

Description: Crutch-Field Tong with two Burrs Large, Medium, Small (Deluxe Model)...

Gigli Saw Handle S.S. (Pair)

Gigli Saw Handle S.S. (Pair)

Model No: IKS1075

Description: Gigli Saw Handle S.S. (Pair)...

Gigli Saw guide (Deluxe Model)

Gigli Saw guide (Deluxe Model)

Model No: IKS1078

Description: Gigli Saw guide (Deluxe Model)...

Gigli Saw Introducer S.S.

Gigli Saw Introducer S.S.

Model No: IKS1079

Description: Gigli Saw Introducer S.S....

Gardner-Wells Skull Traction Tongs

Gardner-Wells Skull Traction Tongs

Model No: IKS1080

Description: Gardner-Wells Skull Traction Tongs...

Gigli Saw Wire - Ordinary

Gigli Saw Wire - Ordinary

Model No: IKS1081

Description: Gigli Saw Wire - Ordinary...

Gigli Saw Wire - Fine

Gigli Saw Wire - Fine

Model No: IKS1082

Description: Gigli Saw Wire - Fine...

Targeting Jig For Multiangle Locking Tibia Nail

Targeting Jig For Multiangle Locking Tibia Nail

Model No: MLTN10

Description: Targeting Jig For Multiangle Locking Tibia Nail...

Spreader

Spreader

Model No: SEC60

Description: Spreader...

Rod Pusher

Rod Pusher

Model No: MAS43

Description: Rod Pusher...

Cervical Screw

Cervical Screw

Model No: CPC520

Description: Cervical Screw...

Total: (139)



.

Request a FREE Quote NOW!