Instruments for Bone Screws

Total: (28)

Counter sink

Counter sink

Model No: IBS700

Description: The GPC countersink is used for making the countersink for the inter fragmentary screws used in Eg: spiral fractures of the tibia. It is available in sizes of 2.0mm, 3.5mm,...

Depth Gauge (A.O. Type)

Depth Gauge (A.O. Type)

Model No: IBS708

Description: The GPC depth guage (*AO type) is used for measuring the size of the screw. It is available in three sizes: mini(for screws of  mini fragment plates), small(for screws of...

Drill Sleeve/ Stop

Drill Sleeve/ Stop

Model No: IBS715

Description: The drill sleeve is used for protection of the soft tissues when the drill is being used. It is being used for 2.0mm, 2.7mm and 3.2mm drill bits....

Drill Sleeve Insert

Drill Sleeve Insert

Model No: IBS720

Description: The GPC drill sleeve insert is used for as a protection sleeve for soft tissues while drilling. It is available in diameter of 2.5mm and 3.2mm....

Gauge for Screw S.S.

Gauge for Screw S.S.

Model No: IBS722

Description: The GPC gauge for screw is used for measuring the length of the screws....

Combined Drill & Tap Sleeve

Combined Drill & Tap Sleeve

Model No: IBS735

Description: The GPC Combined drill and tap is used with one end as the drill sleeve and the other end as the tap sleeve to protect the soft tissues. It is...

Screw Driver, Lane's Type

Screw Driver, Lane's Type

Model No: IBS745

Description: The GPC Screw driver (Lanes type) is used for cortical screw slotted head insertion....

William Screw Driver

William Screw Driver

Model No: IBS748

Description: William Screw Driver...

Hexagonal Screw Driver 1.5mm

Hexagonal Screw Driver 1.5mm

Model No: IBS749

Description: The GPC Hexagonal Screw Driver is used for 1.5mm screw insertion....

Reverse Measuring Device

Reverse Measuring Device

Model No: IBS750

Description: The GPC Reverse measuring device is used for measuring the length of the guide wire inserted into the neck of femur or distal femur. This is used during DHS/DCS insertion...

Screw Holding Forceps

Screw Holding Forceps

Model No: IBS753

Description: The GPC Screw holding forceps is used to take out the selected length of the screw from the screw box during surgery. It makes the removal of the screw from...

Pointed Drill Guide

Pointed Drill Guide

Model No: IBS755

Description: The Gpc Pointed Drill Guide is used for inserting the wire in to scaphoid for insertion of the Herbert screw....

Washer Hanger

Washer Hanger

Model No: IBS758

Description: The GPC washer hanger is used for keeping the washers on the instrument set together....

Bone Taps

Bone Taps

Model No: IBS760

Description: The GPC bone taps are used for tapping the bone after drilling the bone .they are available in various diameter according to the diameter of the screw to be inserted....

Bone Tap Quick Coupling

Bone Tap Quick Coupling

Model No: IBS762

Description: The GPC bone taps quick coupling is used with quick coupling handle to tap the bone. It is available in various diameter according to the diameter of the screw to...

Quick Coupling Handle for Taps

Quick Coupling Handle for Taps

Model No: IBS765

Description: The GPC Quick coupling handle with taps is used with the bone taps quick coupling for tapping the bone once the pilot hole has been drilled....

Quick Coupling attachment with fibre Handle

Quick Coupling attachment with fibre Handle

Model No: IBS766

Description: Quick Coupling attachment with fibre Handle...

Neutral and Eccentric Drill Guide for 2.0mm

Neutral and Eccentric Drill Guide for 2.0mm

Model No: IBS770

Description: The GPC neutral and eccentric drill guide is used for making a central or eccentric hole through the compression plate....

Neutral and Loaded Drill Guide for 2.5mm

Neutral and Loaded Drill Guide for 2.5mm

Model No: IBS775

Description: Neutral and Loaded Drill Guide for 2.5mm...

Neutral and Loaded Guide, Large for 3.2mm Drill

Neutral and Loaded Guide, Large for 3.2mm Drill

Model No: IBS777

Description: The GPC Neutral and loaded guide large for 3.2mm drill is used for making neutral and eccentric drill holes for the 4.5mm cortical screws used in the 4.5mm plates....

Quick Coupling Adaptor with Jacob End

Quick Coupling Adaptor with Jacob End

Model No: IBS778

Description: The GPC quick coupling adaptor with Jacob end is used for attaching the drill bit....

Hollow Mill for Removal of Screw

Hollow Mill for Removal of Screw

Model No: IBS779

Description: The GPC hollow mill for removal of screw is used for drilling on top of the broken screw for removal of the screw....

Cannulated Tap 7.0mm

Cannulated Tap 7.0mm

Model No: IBS780

Description: The GPC cannulated tap 7.0mm is used for making threads for 7.0mm cannulated cancellous screws....

Guide Wire 1.8mm

Guide Wire 1.8mm

Model No: IBS782

Description: The GPC guide wire 1.8mm is used for DHS guide wire and cannulated cancellous screw guide wire....

Cannulated Drill Bit 4.5mm

Cannulated Drill Bit 4.5mm

Model No: IBS784

Description: The GPC cannulated drill bit 4.5mm is used for drilling on top of the guide wire for 7.0mm cannulated cancellous screws....

Triple Trocar

Triple Trocar

Model No: IBS785

Description: The GPC triple trocar is used as a trocar and also a protection sleeve while drilling....

Screw Driver with Holding Sleeve 1.5mm

Screw Driver with Holding Sleeve 1.5mm

Model No: IBS786

Description: The GPC screw driver with holding sleeve is used for holding the different screws. It has a holding sleeve which prevents the screw from falling while inserting the screw. It...

Parallel Wire Guide

Parallel Wire Guide

Model No: IBS788

Description: The GPC parallel guide wire is a jig which is used for insertion of parallel guide wires in fracture neck of femur when cannlated cancellous screws are used....

Total: (28)



.

Request a FREE Quote NOW!