Features- A tri-fianged nail fixed to a plate at varying angle from 130° to 150°. However, plates with angles 130° and 135° are most commonly used
- Adequate stabilization can be achieved
- Shaft compression holes fixed with cortex screw Dia. 4.5 mm
- Available in various blade length from 50 mm - 100 mm (with 5 mm diff.)
Profile
- Thickness (T): 5.5 mm
- Width (W): 19 mm
- Hole Spacing (HS): 16 mm
Length
(mm) |
Code for Jewett Nail Plate 4.5 mm, 130° |
| 4 Holes |
5 Holes |
6 Holes |
7 Holes |
8 Holes |
10 Holes |
12 Holes |
|
50
|
623.130.04.50 |
623.130.05.50 |
623.130.06.50 |
623.130.07.50 |
623.130.08.50 |
623.130.10.50 |
623.130.12.50 |
|
55
|
623.130.04.55 |
623.130.05.55 |
623.130.06.55 |
623.130.07.55 |
623.130.08.55 |
623.130.10.55 |
623.130.12.55 |
|
60
|
623.130.04.60 |
623.130.05.60 |
623.130.06.60 |
623.130.07.60 |
623.130.08.60 |
623.130.10.60 |
623.130.12.60 |
|
65
|
623.130.04.65 |
623.130.05.65 |
623.130.06.65 |
623.130.07.65 |
623.130.08.65 |
623.130.10.65 |
623.130.12.65 |
|
70
|
623.130.04.70 |
623.130.05.70 |
623.130.06.70 |
623.130.07.70 |
623.130.08.70 |
623.130.10.70 |
623.130.12.70 |
|
75
|
623.130.04.75 |
623.130.05.75 |
623.130.06.75 |
623.130.07.75 |
623.130.08.75 |
623.130.10.75 |
623.130.12.75 |
|
80
|
623.130.04.80 |
623.130.05.80 |
623.130.06.80 |
623.130.07.80 |
623.130.08.80 |
623.130.10.80 |
623.130.12.80 |
|
85
|
623.130.04.85 |
623.130.05.85 |
623.130.06.85 |
623.130.07.85 |
623.130.08.85 |
623.130.10.85 |
623.130.12.85 |
|
90
|
623.130.04.90 |
623.130.05.90 |
623.130.06.90 |
623.130.07.90 |
623.130.08.90 |
623.130.10.90 |
623.130.12.90 |
|
95
|
623.130.04.95 |
623.130.05.95 |
623.130.06.95 |
623.130.07.95 |
623.130.08.95 |
623.130.10.95 |
623.130.12.95 |
|
100
|
623.130.04.100 |
623.130.05.100 |
623.130.06.100 |
623.130.07.100 |
623.130.08.100 |
623.130.10.100 |
623.130.12.100 |
For Titanium, please affix �T� after above code number
