| GOS1516 |
Instrument Set for intraHEAL Proximal Hip Stabilizing Advanced Nail (PHA) |
Qty. |
| GOS1516.01 |
Ruler |
1 |
| GOS1516.02 |
Protection Sleeve & Guiding Sleeve, 3.2 mm |
1 |
| GOS1516.03 |
Proximal Hollow Drill Bit/Straight Entry Reamer |
1 |
| GOS1516.04 |
Quick Coupling Handle |
1 |
| GOS1516.05 |
Tissue Protector |
2 |
| GOS1516.06 |
Ball Head Guide Pin/wire, 2.5/4.0/1000 |
1 |
| GOS1516.07 |
Reduction Rod / Medullary Tube |
1 |
| GOS1516.08 |
Guide Rod Holder |
1 |
| GOS1516.09 |
Cannulated Bone Awl Straight |
1 |
| GOS1516.10 |
PFA Handle |
1 |
| GOS1516.11 |
PFA Connecting Bolt /Nut (M 10 X 1.5 /SW8) |
2 |
| GOS1516.12 |
T Wrench for Connecting Bolt/Ball tip spanner |
1 |
| GOS1516.13 |
Impactor Connector |
1 |
| GOS1516.14 |
Combination Wrench |
1 |
| GOS1516.15 |
Hammer |
1 |
| GOS1516.16 |
Proximal Aiming Device 170/200 + Lock Wheels M8 |
1 |
| GOS1516.17 |
Blade Nail Sleeve, Guide Pin Sleeve 11.2/3.2 + Sleeve Pin, 3.2 mm / compression Nut |
5 |
| GOS1516.18 |
Threaded Guide Pin, 3.2 X 400 mm |
4 |
| GOS1516.19 |
Reverse Measuring Device 3.2 mm |
1 |
| GOS1516.20 |
Hollow Drill Bit for Proximal Cortical Bone 3.2/10.6/11.2 |
1 |
| GOS1516.21 |
Proximal Limitation Cannulated Drill Bit + Limitator, 3.2/10.6/11.2 mm |
1 |
| GOS1516.22 |
Blade Screw Knock-in/Locking Screw driver (for Cannualted Blade) |
1 |
| GOS1516.23 |
Blade Nail Remove Rod |
1 |
| GOS1516.24 |
Dynamic & static oblique locking Guide Rod, 240 mm |
1 |
| GOS1516.25 |
90° Static Guide Rod for 170mm &240mm |
2 |
| GOS1516.25 a |
Guide Rod 170mm/200mm dynamic and 170/200mm oblique static |
2 |
| GOS1516.26 |
Distal drill Sleeve set with trocar , 8.2/4.3 mm |
1 |
| GOS1516.27 |
Drill Bit 4.3 mm with Limitator |
1 |
| GOS1516.28 |
Drill Bit 4.3mm |
1 |
| GOS1516.29 |
Depth Gauge |
1 |
| GOS1516.30 |
Distal Locking Screw Driver , SW3.5 |
1 |
| GOS1516.31a |
Lock Wheel Short |
1 |
| GOS1516.31b |
Lock Wheel Short Long |
1 |
| GOS1516.31c |
Lock Wheel |
1 |
| GOS1516.32 |
Hooked Guide Pin, 2.8 mm |
1 |
| GOS1516.33 |
End Cap Cannulated Screw Driver, 2.8/SW4.0/SW11 |
1 |
| GOS1516.34 |
End Cap Cannulated Sleeve/Extension Rod SW11 |
1 |
| GOS1516.35 |
Blade Extractor SW4.5/3.2 (T type) |
1 |
| GOS1516.36 |
Sliding Hammer |
1 |
| GOS1516.37 |
Nail Extraction Rod M10 x 1.5 |
1 |
| GOS1516.38 |
PFA Long Nail Distal Connection Guide Rod |
1 |
| GOS1516.39 |
Lock Wheel Wrench SW5 (Allen key) |
2 |
| GOS1516.40 |
PFA Distal connecting Guide Rod (left/Right) for Long Nail |
1 |
| GOS1516.41 |
PFA Long Nail Distal Position Rack |
1 |
| GOS1516.42 |
Flexible Reaming Shaft |
1 |
| GOS1516.43 |
Drill Sleeve, 5.2 mm |
1 |
| GOS1516.44 |
Positioning Drill Bit |
1 |
| GOS1516.45 |
Flat-Head Drill bit |
1 |
| GOS1516.46 |
Position Rod T-type |
1 |
| GOS1516.47 |
Positioning Block |
1 |
| GOS1516.48 |
Reaming Bits (dia. 9mm to 13.5mm ) 5 mm Difference |
10 |
| GOS1516.49 |
Protection Sleeve with trocar |
1 |
| GOS1516.50 |
Open Wrench (for Blade) |
1 |
| GOS1516.51 |
Screw Driver for Cephalic Screw |
1 |
| GOS1516.52 |
Universal locking screw driver, dia 3.5mm for set screw |
1 |
| AGC1516 |
Aluminium Graphic Case |
1 |
