GOS1404-S |
DHS/DCS Plate Instrument Set |
|
PIS601 |
Dual Use Drill Guide 3.2 mm |
1 |
IBS735.45 |
Combination Drill Guide 3.2/4.5 mm |
1 |
IBS735.65 |
Combination Drill Guide 4.5/6.5 mm |
1 |
PIS614 |
Small Impactor |
1 |
BTD1130.32.130 |
Drill Bit 3.2 mm |
2 |
BTD1130.45.130 |
Drill Bit 4.5 mm |
2 |
C-IBS762.45 |
Cortex Screw Tap 4.5 mm |
1 |
C-IBS762.65 |
Cancellous Screw Tap 6.5 mm |
1 |
IBS750 |
Pin Depth Gauge |
1 |
PIS606 |
DHS/DCS Lag Screw Tap Dia. 12 mm |
1 |
PS918.25.250 |
Threaded Guide Pin 2.5 mm x 250 mm |
2 |
IBS709 |
Depth Gauge 90 mm |
1 |
PIS612 |
DCS Centering Sleeve - Short |
1 |
PIS617 |
DHS Centering Sleeve - Long |
1 |
PIS616 |
DHS/DCS Lag Screw Wrench - Cannulated |
1 |
PIS608 |
DHS/DCS Lag Screw Extractor - Solid |
1 |
C-ILBS747.35 |
Hex Screwdriver with Screw Clamp SW3.5 |
1 |
PIS605 |
T-Handle Quick Coupling |
1 |
PIS615 |
DHS/DCS Plate Impactor |
1 |
PIS600 |
DHS Angle Ruler - 135 Degrees |
1 |
PIS629 |
DCS Angle Ruler - 95 Degrees |
1 |
PIS626 |
DHS Triple Reamer |
1 |
PIS625 |
DCS Triple Reamer |
1 |
PIS602 |
Plate & Lag Screw Tray |
1 |
PIS603 |
Screw Tray |
1 |
|
Instrument Case |
1 |
